.                       .

 About Us     Contact us    News

 
  
Unifiber Primer - For direct application on to GRP/FRP


Unifiber yacht primer allows for direct application onto GRP/FRP, as a key coating applied at a low thickness. Providing excellent adhesion to the substrate where a one-component system is required.

 

Unifiber yacht primer is also used as an intermediate coat between epoxies and two component finishes. Used above and below the waterline. Unifiber fibreglass primer, can be over coated with Topkapi enamel or Antifouling.  

Unifiber Yacht Primer
Features and Benefits

  • Excellent adhesion for direct application to GRP/FRP  
  • Fast Drying  
  • Used as tie coat between epoxy primers and
    antifouling
Product Technical Details:
Area of Use: Below and Above the waterline
Bare Substrate:

GRP/FRP

Coverage per Litre: 10 m2 per litre
Application Method: Brush - reducing by 0-5% with Thinner 765
Spray - reducing by 10-20% with Thinner 765
Touch Dry: 20-30 minutes at 20ºC
Recoat Time: Minimum 6 hours at 20ºC

Colour:

light green
Number of Coats: 1-2
Packaging Size: 750ml and 2.5 Litres

* The product information is a general overview, to help when deciding which product to use. Please see the product's technical data sheet for specific information.